Products

PLE 113 Orbital Shaking Incubator

Orbital Shaking Incubators are designed for precise temperature control and simultaneous shaking applications required in fermentations studies, enzyme reactions, tissue culture.

OSI – 100 & 200

OSI – 300

PLE 113 Orbital Shaking Incubator

Pooja Lab Shaking Incubator is one of its” kinds that included both heating and cooling illumination as optional are available in two versions i.e. non-GMP and GMP choose from different models suitable for various applications. The shaking system with latest shaking mechanism consist of 5 eccentric supported with 11 ball bearing for trouble free and long life operations. A heavy-duty brushless AC motor coupled with reduction gear head for non-stop operations powers shaking mechanisma Users friendly Microprocessor based AC

Specifications / Model No.	OSI - 100	OSI - 200	OSI - 300
Temperature	10 to 60°C	10 to 60°C	5°C above ambient to 60°C
Accuracy	± 0.5°C	± 0.5°C	± 0.5°C
Setting	± 1°C	± 1°C	± 1°C
Control	Soft touch membrane keypad	Soft touch membrane keypad	Soft touch membrane keypad
Display	Digital	Digital	Digital
Shaking Speed	20 to 200 RPM	20 to 300 RPM	20 to 200 RPM
Control	Microprocessor based AC drive	Microprocessor based AC drive	Microprocessor based AC drive
Motor	Maintenance free brushless AC motor with gear head	Maintenance free brushless AC motor with gear head	Maintenance free brushless AC motor with gear head
Orbit	1" (25.4 mm) fixed	1" (25.4 mm) fixed	1" (25.4 mm) fixed
Refrigeration	0.4 hp	0.4 hp	None
Insulation	PUF	PUF	Glass Wool
Doors	Metallic insulated fitted at top	Metallic insulated fitted at top	Perspex fitted at top
External Dimensions	762 W x 710 D x 875 H mm approx plus door height	762 W x 710 D x 875 H mm approx plus door height	762 W x 710 D x 875 H mm approx plus door height
Capacity to hold Flasks	24 Nos of 50/100 ml or 16 Nos of 250/500 ml or 9 Nos of 1000/2000 ml	24 Nos of 50/100 ml or 16 Nos of 250 or 500 ml or 9 Nos of 1000/2000 ml	24 Nos of 50/100 ml or 16 Nos of 250 or 500 ml or 9 Nos of 1000/2000 ml

OPTIONAL ACCESSORIES

Imported Microprocessor based auto turing PID digital controller with dual display for SET value and PROCESS value, which gives temperature accuracy of 0.2°C. Centronic interface for keeping hard copies of Date, Time and Temp (Set value and actual value) on 80 Col. dot matrix printer supplied without printer (This facility is available only on with imported controller); Safety alarm system for warming incase of temperature overshoot 230V output for extemal hooter; PC interface communication card with RS 485 to use with the above imported control system (Hardware); 21 CFR part 11 compliance window based software for data management complete with RS 485 for temperature; 80 col. dot-matrix printer with stand; illumination for OSI-100 & 200 with timer and lotus clamps with screw; illumination control with digital display. Maximum lightinsensitivity is 3500 lux.

PRE-INSTALLATION REQUIREMENTS

Stabilized 230V 50Hz AC single-phase 20amps power supply with MCB and proper earthing within the radius of one meter from the installation. To be installed in an air-condition or in a cross ventilated, dust free and clean environment with free space around. Room temperature should be below 30 deg.C) Zero level flooring and Floor level drainage within the radius of one meter from the installation.